ABB i-bus KNX Product Manual - page 21
ABB i-bus
KNX
Device technology
DLR/S 8.16.1M | 2CDC 507 100 D0202 19
Temperature range
Power
Storage
Transport
-
5 °C…+45 °C
-
25…+55 °C
-
25…+70 °C
Environmental conditions
Humidity
Maximum 95 %, no condensation allowed
Design
Flush mounted device
For installation in 60 mm flush mounted box
Dimensions
54 x 20 (Ø x H)
Weight
In kg
0.04
Installation position
Any
Housing, color
Plastic housing, gray
Approvals
KNX to EN 50 090-2-2
Certificate, in conjunction with ABB i-bus
®
KNX
light controllers
CE mark
In accordance with the EMC guideline and low
voltage guideline
1)
Rooms are lit up differently by the incidental daylight and the artificial light of the lamps. Not all the surfaces in the rooms, e.g. walls, floor, and
furniture, reflect the light that falls on them in the same manner. Accordingly, even though there is an exactly calibrated constant light control in daily
operation, deviations to the set target value may occur. These deviations may be up to +/- 100 lx, should the current ambient conditions in the room,
and accordingly the reflection properties of the surfaces (paper, people, reorganized or new furniture), differ significantly from the original ambient
conditions at the time of calibration. Deviations may also occur if the light sensor is influenced by direct or reflected light falling on it, which is not
influenced or only slightly influenced by the surfaces in the detection range of the light sensor.