ABB i-bus KNX Product Manual - page 38
Other manuals for i-bus KNX:
Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual
Manual is about: Room temperature controller
of
220
ABB i-bus
KNX
Commissioning
36 2CDC 507 100 D0202 | DLR/S 8.16.1M
3.1.1.1
Conversion procedure
Import the current application into ETS.
Insert the desired device into your project.
Right click the product and select Plug-in > Convert in the context menu.
Then make the desired settings in the Convert dialog.
Finally, you must replace the physical address and delete the old device.
Should you wish only to copy individual inputs/outputs within a device, use the
function, page 37.