ABB i-bus KNX Product Manual - page 42
ABB i-bus
KNX
Commissioning
40 2CDC 507 100 D0202 | DLR/S 8.16.1M
Copy
The following options can be selected before copying the parameter settings:
Keep group addresses in the destination channel unchanged (if possible)
Copy group addresses
Delete group addresses in the destination channel
With this button, you copy the settings from the source channel to the destination
channel/channels.
Exchange
The following options can be selected before exchanging the parameter settings:
Exchange without group addresses
Exchange with group addresses
Delete group addresses
With this button, you exchange the settings of the source channel with those of the
destination channel.
Confirm your selection with this button, and the window closes.
Using this button, the window closes without accepting the changes.