Canon Color imageRUNNER C4580 Service Manual - page 154
of
851
Chapter 5
5-24
5.7.2.2 Removing the Main Controller PCB
(main)
1) Remove the main controller PCB (sub R-A) [3]
together with its mounting plate.
- 2 screws [1]
- 1 connector [2]
F-5-21
2) Remove the main controller PCB (sub PDRM-A)
[3] together with its mounting plate.
- 2 screws [1]
- 1 connectors [2]
F-5-22
3) Remove the main controller PCB (sub SJ-A) [3]
together with its mounting plate.
- 2 screws [1]
- 1 connector [2]
F-5-23
4) Remove the main controller PCB (sub LAN-A)
[4] together with its mounting plate.
- 2 connectors [1]
- 2 screws [2]
- 1 connector [3]
F-5-24
Points to Note When Removing the HDD
Take care to avoid static damage when removing the
HDD.
It is also important to protect the HDD from impact.
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[1]
[2]
[3]
[4]