Canon Color imageRUNNER C4580 Service Manual - page 767
Chapter 19
19-122
19.5.2 FEEDER
19.5.2.1 FEEDER Table
T-19-65
19.5.3 SORTER
19.5.3.1 SORTER Table
T-19-66
F-19-10
FEEDER>OPTION
Sub item
Description
level.
LS-DBL
Use it to enable/disable ADF high-speed duplex mode.
Settings
0: on (execute high-speed duplex mode; normal, default)
1: off (do not execute high-speed duplex mode; use low-speed duplex mode)
[Factory default/After RAM clear: 0]
1
STAMP-SW
Use it to specify the presence/absence of the stamp.
This mode item indicates the presence/absence of the stamp, and is designed for use by the service
person.
Settings
0:stamp absent
1:stamp present
[Factory default/After RAM clear: 0]
1
SORTER>OPTION
Sub item
Description
level.
BLNK-SW
Fold position margin width (W) settings when saddle stitcher is used
Setting values
0: Normal width (5 mm)
1: Extra width (10 mm)
[Factory settings and after RAM clear: 0]
1
MD-SPRTN
Finisher function restriction setting
Setting values
0: Normal
1: Reduced operation
[Factory settings and after RAM clear: 0]
1
W