Canon Color imageRUNNER C4580 Service Manual - page 392
Chapter 10
10-65
2) Attach the bushing [1] to the frame; then, attach
the gear shaft [2].
F-10-144
3) Fit the 6 locations [A] indicated in the figure
firmly into the holes of the mounting plate; then,
secure the sensor mounting plate [2] in place.
F-10-145
4) Attach the gear [1] and the E-ring [2].
F-10-146
5) Turn the gears to see that the movement is smooth.
10.10.29 Inside Delivery Roller
10.10.29.1 Preparation for Removing the
Inside Delivery Roller
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
38)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
10.10.29.2 Removing the Inside Delivery
Roller
1) Open the fixing feeder unit cover.
F-10-147
[1]