Canon Color imageRUNNER C4580 Service Manual - page 413
Chapter 10
10-86
3) Remove the inside cover (lower) [3].
- 1 connector [1]
- 4 screws [2]
F-10-220
4) Remove the cassette.
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
4-1) Slide out the cassette.
5) Remove the manual feed unit. (page 10-
52)Reference[Removing the Manual Feed Unit]
6) Remove the front cover. (page 12-
22)Reference[Removing the Front Cover]
7) Remove the rear right cover. (page 12-
22)Reference[Removing of the Right Rear
Cover]
8) Pull out the pickup cassette and open the pickup
vertical path cover; then, remove the front right
cover.
- 2 Screws
9) Remove the pickup vertical path cover [3].
- screws [2](Remove the pickup vertical path
lower cover [1])
F-10-221
10) Remove the pickup unit. (page 10-
36)Reference[Removing the Pickup Unit]
11)Remove the rear fan cover. (page 12-
25)Reference[Removing the Rear Fan Cover]
12) Remove the rear upper cover. (page 12-
25)Reference[Removing the Rear Upper Cover]
13) Remove the rear lower cover. (page 12-
25)Reference[Removing the Rear Lower Cover]
14) Remove the DC controller box 2. (page 12-
35)Reference[Removing the DC Controller
Box2]
15) Remove the DC controller box 1. (page 12-
36)Reference[Removing the DC Controller
Box1]
16) Remove the IH power supply unit. (page 12-
32)Reference[Removing the IH Power Supply
Unit]
17) Remove the lattice connector mount [4].
- 2 Clamps [1]
- 2 Screws [2]
- 6 Connectors [3]