Canon Color imageRUNNER C4580 Service Manual - page 770
Chapter 19
19-125
Type of test print for each number entered for PG > TYPE
T-19-69
PG-PICK
Used to select output level during test print output.
Setting values
1: Cassette 1
2: Cassette 2
3: Cassette 3
4: Cassette 4
5 to 6: Not used
7: Side deck
8: Manual feed
[Factory default/After RAM clear: 1]
1
2-SIDE
Use it to set the output mode for test printing.
Settings
0: single-sided (at time of shipment/upon RAM initialization)
1: double-sided
[Factory default/After RAM clear: 0]
1
PG-QTY
Use it to set the output mode for test printing.
Use it to set the copy count of test printing.
1 to 999
[Factory default/After RAM clear: 1]
1
Entered number
Description
0
Image from CCD (normal print)
1
For development
2
For development
3
For development
4
16 gradations
5
Full-sheet half tones
6
Grid
7
For development
8
For development
9
For development
10
MCYBk horizontal stripes
11
For development
12
YMCBk 64 gradations
13
For development
14
Full-color 16 gradations
15 to 100
For development
COPIER>TEST>PG
Sub item
Description
level.