Canon Color imageRUNNER C4580 Service Manual - page 370
Chapter 10
10-43
Å@Points to Note When Mounting the
Pickup Motor
Be sure that the belt [2] is fitted on the gear [1] of the
motor.
F-10-67
10.10.10 Cassette Retry Paper
Sensor
10.10.10.1 Preparation for Removing the
Cassette Retry Paper Sensor
1) Remove the cassette.
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
1-1) Slide out the cassette.
2) Remove the front right cover. (page 12-
22)Reference[Removing the Right Front Cover]
3) Remove the rear right cover. (page 12-
22)Reference[Removing of the Right Rear
Cover]
4) Remove the pickup vertical path cover [3].
- 1 screw [2] (remove the pickup vertical path
lower cover [1])
F-10-68
5) Remove the pickup unit. (page 10-
36)Reference[Removing the Pickup Unit]
6) Remove the pick-up system sensor mounting
plate.
6-1) Remove the bracket [2].
- 2 screws [1] at the rear
F-10-69
6-2) Remove the sensor mounting plate [5].
- connector [1]
- screw [2]
- cassette pickup solenoid [3]
- 5 screws [4]
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
[1]
[2]
[1]
[1]
[2]