Canon Color imageRUNNER C4580 Service Manual - page 773
Chapter 19
19-128
19.7 COUNTER (Counter Mode)
19.7.1 COPIER
19.7.1.1 COPIER Table
The COPIER/COUNTER screen is shown below. The items are described starting on the next page.
F-19-12
Clearing counter values
1) Select the item to clear, displaying it in reverse.
2) Press the clear key on the operation panel.
- The counter is cleared, resetting it to "00000000".
Small size and large size in this mode
- TOTAL/PICKUP/FEEDER/JAM
Large (L) size: Paper larger than A4, LTR size
Small (S) size: A4, LTR size and smaller paper
- DRBL-1/DRBL-2 (PD-PU-RL, C3-PU-RL, C4-PU-RL)
Large (L) size: Paper longer than 324 mm in the feed direction
Small (S) size: Paper 324 mm or shorter in the feed direction
- DRBL-2 (DF-PU-RL, DF-SP-PD, DF-F-BLT, DF-SP-RL)
Large (L) size: Paper longer than the LTR length (216 mm) in the feed direction
Small (S) size: Paper of the LTR length (216 mm) or shorter in the feed direction
Reading counters for consumable parts/parts needing periodic replacement
The copier has special counters (DRBL-1/DRBL-2) that can be used to provide a guideline for when to replace
consumable parts or parts needing periodic replacement.
Small size sheets are counted in increments of 1, large size sheets are counted in increments of 2.
[1]: Displays the part name. In this example, the intermediate transfer belt unit.
[2]: Displays the counter value (actual number of sheets used). The value is cleared by pressing the clear key
when the part is replaced.
TR-BELT
/
00000201
/
00240000
/
0%
!!
000082
[1]
[2]
[3]
[4]
[5]
[6]