Canon Color imageRUNNER C4580 Service Manual - page 434
Chapter 10
10-107
10.10.58.2 Removing the Delivery Path
Switching Solenoid 2
1) Open the fixing/feeder unit cover.
F-10-296
2) Pull the lever [2], and remove the delivery path
switching solenoid 2 [4] with its mount.
- 1 Connector [1]
- 1 Screw [3]
F-10-297
10.10.59 Face-Down Delivery Roller 1
Drive Belt
10.10.59.1 Preparation for Removing the
Face-Down Delivery Roller 1 Drive Belt
1) Remove the upper left cover. (page 12-
23)Reference[Removing the Upper Left Cover]
2) Remove the center delivery tray [2].
(Referring to procedure 10.10.54)
3) Remove the delivery vertical path unit. (page 10-
93)Reference[Removing the Delivery Vertical
Path Unit]
10.10.59.2 Removing the Face-Down
Delivery Roller 1 Drive Belt
1) Free the protrusion [1] of the belt pulley (upper or
lower) from the groove of the shaft, and move it;
then, remove the belt [2].
F-10-298
[3]
[2]
[1]
[4]