IBM Proventia Network Enterprise User Manual - page 232
Chapter 17: Viewing Agent Status
232
IBM Internet Security Systems
The Proventia Manager Home Page
Introduction
The Proventia Manager Home page provides the following types of information about the
Enterprise Scanner agent:
●
protection status
●
system status
Tip:
System status information is also available in the SiteProtector Console. (See page
234.)
Protection status
The status icon indicates the operational status of the agent as follows:
System status
On the Home page, the system status section describes the current status of the system as
follows:
Icon
Status
The component is active.
The component is stopped.
The component is in an unknown state.
Note: This status may require immediate attention.
Table 85: Protection status icons
System Status Information
Description
Model Number
The model number of the agent.
Serial Number
The serial number of your agent.
Network Interfaces
The number of interfaces on your agent.
Base Version Number
The base version of the agent software, which is one of the
following:
•
the base version is the software version shipped with the agent
•
the software version of the most recent system backup.
Uptime
The length of time that the agent has been online. The time is
given in the following format:
x days, x hours, x minutes
Last Restart
The time the agent was last restarted. The time is given in the
following format:
•
yyyy-mm-dd
•
hh:mm:ss
Example:
2004-05-04 16:24:37
Table 86: System status icons