IBM Proventia Network Enterprise User Manual - page 40
Chapter 2: Installing and Configuring an Agent
40
IBM Internet Security Systems
Logging On to the SiteProtector Console
Introduction
Use the SiteProtector Console to set up users and user groups, configure scans, and
monitor the protection status of your Site.
Requirement
You must meet the following requirements to log on to the SiteProtector Console:
●
You must install the SiteProtector Console on your computer.
●
You must have a user ID and password for the SiteProtector system.
Procedure
To log on to the SiteProtector Console:
1. Click Start on the taskbar, and then click All
Programs
→
ISS
→
SiteProtector
→
Console
.
2. Do one of the following:
■
If the Site is already defined in the SiteProtector system, select it.
■
If the Site is not already defined in the SiteProtector system, right-click My Sites,
select New
→
Site
from the pop-up menu, and then type the IP address or the DNS
name of the Site in the Server box.
3. If you do not use the default port number (3998), type the port number of the Site
server to communicate with in the Port box.
4. Type your SiteProtector User name.
Note:
If your user name is part of a domain, use the following format:
domain_name\user_name
5. Type your Password.
6. Click OK.
The Site Manager appears.