Mediaedge Decoder User Manual - ■ Host Name
- 104 -
MEDIAEDGE
Exclusion list
Enter the host name or the IP address of the server that access directly
without using the proxy. When setting more than one, please specify by
separating them with comma(s).
■ Host name
Host name
The host name of the MEDIAEDGE Decoder will be set.
The characters that can be used for the host name are single-byte alphabets,
numbers, and “ – “ only. When the host name is not set up, it will be
generated automatically from the MAC address such as “DEC-xxxxxx.”
* “ – “ cannot be used at the beginning and the ending of the host name.
Explanation of host
The explanation that will be displayed with the host name at the same time
will be set up. There is no need to set up particularly, but when the number of
equipment is increased, it will be helpful to distinguish between them.
■ NTP
Set up the NTP server that correct the time of the MEDIAEDGE Decoder
internal clock > time setting (NTP)
Obtaining the address of NTP serevr automatically – (Initial value)
Using the next NTP server
Host name
Update interval
It will be connected to the NTP in interval that is set here.
■ UPnP
The MEDIAEDGE Decoder is compatible with auto-detection by UPnP.
> UPnP
Enable – (Initial value)
●
●
●
●
●
●
●
●