Mediaedge Decoder User Manual - ■ Snmp
- 106 -
MEDIAEDGE
Account
Set the account and the setup value to connect to the shared drive.
User name
Initial value:mediaedge
Password
Initial value:No set value
Shared Drive Authority
When the setting is disable, that drive will not be shared. Only reading is
possible when set as [Read only], and reading and writing will be possible
when set as [Read-write]. The [Shared drive authority] and the [Drive writing
authority] can be set separately; however, when the drive is set as [Read
only], the writing will not be allowed even if it is set as [Read-write].
Internal HDD
SD card
USB1
USB2
■ SNMP
SNMP
Enable
SNMP agent function will be enabled.
Disable
Initial value. The communication of SNMP is disabled.
Version
The version of SNMP communication protocol will be specified.
SNMPv2
Initial value.
SNMPv3
Community name (SNMPv2)/User name(SNMPv3)
The community name (SNMPv2) or the user name (SNMPv3) will be
specified. (Initial value:public)
Access mode
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●