Mediaedge Decoder User Manual - page 89
- 89 -
MEDIAEDGE Decoder
It will be automatically generated within the AutoIP.
Use the following IP Address:
Set the IP address that will be used manually. For the setting value, please
check woth your network administrator.
DNS
The address of the DNS server will be set.
Obtaining the Address of the DNS Server Automatically:
The address of the DNS server will be automatically obtained from the DHCP
server.
Using the Address of the Next DNS Server:
Set the DNS server. For the setting value, please check with your network
administrator.
Preferred DNS server:
Specify the preferred DNS server.
Alternate DNS server:
Specify the DNS server to be used in case that a response is not returned
from the preferred DNS server.
DNS domain name:
For the setting value, please check with your network administrator.
NTP
Set the NTP server which corrects the time on the internal clock of the
MEDIAEDGE Decoder. > Time setting (NTP)
Obtain the Address of the NTP Server Automatically:
The address of the NTP server will be automatically obtained from the DHCP
server.
Use the following NTP Server:
Host name
Set the NTP server to be used. For the setting value, please check with
your network administrator.
Update interval (minute)
It will connect to the NTP server and correct the time in interval that is set
here.
●
●
●
●
●
●
●
●
●
●