Mediaedge Decoder User Manual - 1-1 About The Update

- 68 -

MEDIAEDGE

1. Update of  Content

1-1 About the Update

The contents, the schedule files, and the menu files that are necessary for the 

playback in the MEDIAEDGE Decoder can be copied to the body in several ways.  

Please choose the method depending on the applications.  It is also possible to 

use a combination of more than one way; however, please consider the integrity in 

operation of each to do so.

1-2 About the Update

Cooperation with the DCM is needed when creating the DCM schedule in the DCM 

and managing the content.  When the DCM and the MEDIAEDGE Decoder are 

properly set to cooperate, it is possible to write the content in the MEDIAEDGE 

Decoder and set the schedule only by the operation of the DCM.

Please refer to the usage methods of each application when creating and operating schedule files

in other softwares without using the DCM.

Please complete the following settings in the Web console of the MEDIAEDGE 

Decoder.

■ Basic Settings

Default drive

Select the drive where the content file will be transferred by using the DCM.  

When the SD card and the USB storage are selected, errors will occur in the 

transfer of the content if the device is not currently connected.  

Write access drive

Set the drive that the content is transferred to "read-write."  The drive that is 

not going to be used will have no problems either way.