Mediaedge Decoder User Manual - page 132
- 132 -
MEDIAEDGE
2. Update of Firmware
2-1 Update by the Web Browser
1. Copy the firmware uodate file to the PC that will be connected to the MEDIAEDGE
Decoder.
2.Connect to the Web console of the MEDIAEDGE Decoder by using the Web
browser.
3.Select the update of the firmware and start updating by specifying the file.
* Please mark [Do not run version check] when it will be updated to the older firmware than the
current one.
4.After the update is completed, the MEDIAEDGE Decoder will restart automatically.
2-2 Updating by SD card / USB storage
1. Put update control script (update.inst) and the firmware update file (decoder.
x.x.x.system) in the root folder of the SD card or the USB storage.
* In update.inst, enter the following with text editor in advance.
#!UPDATE
update_firm decoder.x.x.x.system
When updating to an older firmware, specify –f option.
update_firm –f decoder.x.x.x.system
2.Connect the SD card / USB storage to the MEDIAEDGE Decoder.
3.Run the update if using the newer firmware.
4.After the update is completed, the MEDIAEDGE Decoder will automatically restart.
Notes
When the power indicator is flashing in orange, the firmware is in the middle of updating.
During this time, please do not turn off the power of the MEDIAEDGE Decoder.