Mediaedge Decoder User Manual - ■ Writing Limit of Drive
- 96 -
MEDIAEDGE
■ Writing Limit of Drive
Set whether to enable or disable the writing to each drive. The writing will be
disabled in file delivery and all other operations if set to [Read only].
> Internal HDD/SSD
> SD card
> USB1
> USB2
> Network drive
■ Time Zone
Please select the time zone of the region where the MEDIAEDGE Decoder will
be installed. Please check the check box of [daylight saving time] during the
summer time and the time difference from GMT if the region does not exist in
the choice.
■ Remote Control
Operation of Remote Control
Enable
Initial value.
Disable
The remote control is not used.
ID
When controlling more than one MEDIAEDGE Decoders separately by remote
control, set the corresponding remote control ID. Please set to the same value
as the ID of the remote control to be used.
Power button
Enable
Initial value.
Disable
Disable only the (POWER) key by operating from the remote control.
●
●
●
●