Mediaedge Decoder User Manual - page 72
- 72 -
MEDIAEDGE
When the FEC is enabled in the MEDIAEDGE Decoder, it will run the
communication that added the packet for error correction by the value set in
the MEDIAEDGE Server and the MEDIAEDGE LEB.
Keep alive
The use of the RTSP communication controls the streaming. With the keep
alive enabled, it is possible to detect and recoonect when the streaming
is stopped due to the stop and restart of the MEDIAEDGE Server and the
MEDIAEDGE LEB.
RTSP redirect
With the use of the RTSP redirect, it is possible to control the playback
content externally.
The control such as playback, stop, and pause of the content can be
done in the control command. RTSP server of this unit will only respond
REDIRECT as Method. Method of others will be ignored. Because there is
no authentication function in RTSP redirect, control will be possible from all
devices that can be connected to the network. If security is an issue, please
disable this feature and use the Web API.
Buffering time
Set the time that buffers the received stream internally in milliseconds. When
the buffering time is long, the playback will be delayed though it will make the
playback error to happen less likely due to the network issue. Even when the
setup value is 0, it continues buffering during the minimum required time for
the playback.
●
●
●