Mediaedge Decoder User Manual - ■ Sdi (Sdi Model Only)
of
146
- 122 -
MEDIAEDGE
■ SDI (SDI model only)
Set up the video signal to be output to the SDI.
Display Mode
Off
It will stop the signal output to SDI.
Setting of mode
It will display in the selected mode.
■ Composite Display Mode
Select the mode of the signal output to the composite from NTSC (J), NTSC
(US), and PAL.
NTSC(J)
Initial value. NTSC Set to (Setup level = 0IRE) for Japan.
NTSC(US)
NTSC Set to (Setup level =7.5IRE) for North America.
PAL
This is the standard of analog broadcasting, which is used mainly in China
and Europe.
●
●
●
●
●