Mediaedge Decoder User Manual - 3-2 Startup and Shutdown
- 28 -
MEDIAEDGE
3-2 Startup and Shutdown
■ Startup
There are following ways to start the MEDIAEDGE Decoder.
By connecting AC adapter to the body of the Decoder.
By pressing the (POWER) key on remote control.
By pressing the reset button on the front.
By pressing the startup button from the Web console.
(Only when the MEDIAEDGE Decoder is being shutdown)
■ Shutdown
There are following ways to shutdown the MEDIAEDGE Decoder.
By pressing the (POWER) key on remote control.
By performing [Shutdown] from [Device Administration] > [Restart/
Shutdown] page of the Web console.
A part of the functions (state monitoring by the network) operates in the shutdown state.
Notes when shutting down the equipment
Please do not shutdown while updating the content and the firmware.
When unplugging the AC adapter, please shutdown the equipment and make sure that
the power indicator is off. It may cause the failure of the internal HDD/SSD and the loss
of the content.
●
●
●
●
●
●