Mediaedge Decoder User Manual - page 107
- 107 -
MEDIAEDGE Decoder
Specify the access mode at the time of communication.
Read only
Read write
Initial value.
Authentication
Set the authentication method at the time of communication.
Authentication
None
Initial value.
MD5
SHA
Authentication password
The initial value is not set.
When the SNMPv3 is used, the password needs to be more than 8
characers but less than 15 characters in length. Please make sure to
set the password since it will not be able to set up correctly without a
password.
Encryption
None
Initial value.
DES
Encryption password
The initial value is not set up.
When the SNMPv3 is used, the password needs to be more than 8
characers but less than 15 characters in length. Please make sure to
set the password since it will not be able to set up correctly without a
password.
●
●
●
●
►
►
►
●
●
►
►
●