Mediaedge Decoder User Manual - 2-1 Status
- 78 -
MEDIAEDGE
2-1 Status
The current operation status of the MEDIAEDGE Decoder will be displayed.
■ Equipment Status
CPU usage rate
The usage rate of CPU will be displayed.
Memory space
Remaining amount of available memory will be displayed.
Used memory capacity
The used memory capacity will be displayed.
Elapsed time after the startup
The elapsed time after the startup will be displayed. It will be reset at the
restart.
FAN 1/FAN 2
It will be displayed wheter the Fan 1/Fan 2 are detected. The fan may not be
loaded in some product models. In that case, this dispay will be found. When
it shows the “Error,” there are some issues with the fan. Please contact our
customer support.
Casing temperature
The temperature inside the product casing will be displayed.
Operation mode
Mode
The current operation mode will be displayed. There are “channel” and
“menu” in the operation mode. It will basically operate according to the
settings. It will become “interrupted_playback” if the insert playback is run by
the external network control.
Operation Status
The activity status of current operation mode will be displayed as “Good /
Bad.” If it shows “Bad,” please check the log.
Channel Number
When operating in channel mode, the number of the channel currently
●
●
●