Mediaedge Decoder User Manual - 4-8 Video Output
- 121 -
MEDIAEDGE Decoder
4-8 Video Output
■ HDMI (HDMI model only)
Set up the video signal to be output to the HDMI.
Display Mode
Auto
Initial value. It will choose the best display mode using the HDMI TV.
Off
It will stop the signal output to the HDMI.
Setting of mode
When a mode other than “Auto” is selected, it will display in the selected
mode. When it is connected to the monitior that does not support the
selected display mode, it will display in displayable mode automatically.
Color Space
RGB
YCbCr
Initial value. In regular situations, please use in YcbCr. If the brightness is
different during playback and when stopped,because of the parameters of
content creation, set to RGB.
RGB Output Range
16-235
Initial value. When connected to a regular TV, it will use the 16-235 rather
than the full range 0-255 of RGB as color space.
0-255
In some data created in the CG, the color space is created in the 0-255.
When such data is displayed in 16-235, the black part will appear a little
brighter, and the white part will appear a little darker. Please set the RGB
output range when using such data. When changing this setting, please
check the specifications and settings of the monitor first.
●
●
●
●
●
●
●
●