NEC Univerge SV8100 Installation Manual - page 21
21 |
P a g e
In the TAPI Connection Configuration, enter the name of the PC that has the TAPI driver and Call
Control Service installed on it. This is always the MyCalls server unless you decided to install them
on different PC’s.
Note: If you upgraded from MyCalls version 4 or prior then you have to manually enter the word
“Virtual Ext” in the “Extension Identifiers used by TAPI” dialogue box after the word EXTENSION.
Making sure the words are separated with a comma ( , ) .
The other configuration items that may need to be changed are as follows:
Item
Setting
Outside Line Access Code
Enter the trunk access code that a user will
dial for an outside line.
Number of Internal Call Digits
Enter the maximum number of digits used for
internal extensions. Any dialled digits longer
than this, MyCalls will automatically add the
trunk access code to when dialling out.
Auto Hang up Calls
This features acts like disconnect clear and
when an extension becomes idle will hang up
the phone. This feature is particularly useful
for headset users.
Always Dial These Number Externally
Numbers entered in here are always dialled
with the trunk access code in front of them.
Click OK to save the changes.