QMS 2060 Operation - page 109
Kanji Option
Kit Problems
6-39
Troubleshooting Printer Problems
buffer. See chapter 3, “Advanced Printer Features,” in this guide for
additional information on memory required for duplexing.
Paper Jams Always Occur
1 Check that the media does not exceed the media limit mark.
Make sure that the stack does not exceed the paper limit mark on
the media cassette.
2 Check that the paper stack is correctly aligned.
Make sure that the stack is correctly aligned in the media cas-
sette or in the multipurpose tray.
3 Check that the correct paper type is used.
See appendix B, “Technical Specifications,” in the
Reference
for
media specifications.
4 If your printing from the multipurpose tray, check that
Operator Control/Multipurpose Size menu is set to the size
paper being used.
5 Check the printer for residual jammed media.
6 Remove any jammed media remaining inside the printer by
checking the locations in “Media Jams” on page 6-19.
Kanji Option Kit Problems
Use the information in this section to locate and solve problems that
may arise when installing and using this Kanji SIMM kit.