QMS 2060 Operation - page 42

Introduction

QMS 2060 Print System 

Operation

3-2

Introduction

This chapter describes changing print resolution, using high-resolu-

tion while duplexing, chaining paper cassettes, collating output, print-

ing a status page, cancelling a print job, and ending a print job.

High-Resolution Printing 

The QMS 2060 Print System supports three print resolutions: 

300x300, 600x600, and with an optional daughterboard 1200x1200 

dpi (dots per inch). For printed pages that don’t require optimum print 

quality, such as rough drafts, memos, or text-only pages without 

graphics (dependent on shading details), you may choose to set the 

printer at 600 dpi. Printing at 600 dpi reduces the amount of process-

ing time the printer requires before printing the page. For pages that 

demand high-quality output, especially those containing detailed 

graphics or varying background shades, you’ll want to set the printer 

resolution to a higher resolution.

»

Note: 

To print at 1200x1200 dpi you need to install an optional 

1200x1200 dpi resolution daughterboard, and you may also need to 

add more memory. (See the following section for memory details.)