QMS 2060 Operation - page 36
Using Toner
Cartridges
QMS 2060 Print System
Operation
2-24
Toner Cartridge Handling
The cartridge contains the toner and laser-sensitive drum needed to
operate the laser printer.
n
The cartridge has a wide opening for the laser beam guided via
the reflecting mirror. Be careful not to drop any foreign objects,
such as clips or pins into the cartridge, when handling and install-
ing the cartridge.
n
The drum is extremely sensitive to light and may deteriorate if
exposed to bright light; don’t open or touch the drum protective
shutter.
Toner Cartridge Storage
The toner cartridge
n
Should be kept in its protective bag until you’re ready to install it.
n
Is sensitive to bright light. Don’t store it in direct sunlight or room
light (more than 1500 lux). Store it flat in a cool, dry location away
from sunlight. The maximum storage temperature is 95
º
F (35
º
C)
and the maximum storage humidity is 80% without condensation.
n
Should be kept level during storage. Don’t stand or store the car-
tridge on its end or turn upside down; the toner inside the car-
tridge may become caked or unequally distributed.
n
Should be kept away from salty air environments, corrosive gases
such as aerosols, and extreme heat or humidity.
n
Should be kept away from monitors, disk drives, and floppy disks.
The magnets in the cartridge can damage stored data.
Refilled Toner Cartridges
Refilled toner cartridges may produce variations in toner quality and
reliability, thus reducing the print quality of your documents. In addi-
tion, toner leaks, which are common with some refilled cartridges,
affect your warranty.