QMS 2060 Operation - page 80
Service Messages
QMS 2060 Print System
Operation
6-10
»
Note:
A service message sometimes occurs as a result of an unusual
combination of events, not because of an actual problem. When the
printer stops and a service message displays in the message window,
turn the printer off and then back on. This often clears the service
message indicator, and printer operation resumes. Always try this
before making a service call.
Service calls should be placed to the vendor from whom you pur-
chased the printer. If you cannot get service from your vendor, see
appendix A, “QMS Customer Support,” for more information.
CALL FOR SERVICE ENGINE ERROR 10
An error has been
detected with the
main motor. Contact
your QMS vendor.
CALL FOR SERVICE ENGINE ERROR 11
An error has been
detected with the
scanner motor.
Contact your QMS
vendor.
CALL FOR SERVICE ENGINE ERROR 12
An error has been
detected with the fan
motor. Contact your
QMS vendor.
CALL FOR SERVICE ENGINE ERROR 20
An error has been
detected with the
beam. Contact your
QMS vendor.
CALL FOR SERVICE ENGINE ERROR 30
An error has been
detected with the
duplexer. Contact
your QMS vendor.
This message...
means...
» Note:
Shaded table cells indicate that the message scrolls.