QMS 2060 Operation - page 85
Testing PC-
Printer
Communication
6-15
Troubleshooting Printer Problems
Changing Serial Settings
Since your printer is configured at the factory for the most typical
printing environments, the serial settings in your AUTOEXEC.BAT file
and on the start-up page should be the same. However, if they differ,
you must configure the printer to use the serial settings specified in
the AUTOEXEC.BAT file.
Press the following control panel keys in the order shown
Press
this
key...
to...
For 1.5 seconds, the
message window
reads...
and then it reads...
Online/
Offline
Turn off the Ready
indicator and
enable printer
configuration.
IDLE
Menu
Access the
configuration
menu.
CONFIGURATION
OPERATOR CONTROL
Next
Advance to the
Administration
menu.
ADMINISTRATION
Select
Access the
Administration
menu.
COMMUNICATIONS
Select
Access the
Communications
menu.
TIMEOUTS
Next
Advance to the
Serial menu.
SERIAL
Select
Access the Serial
menu.
MODE