QMS 2060 Operation - page 49

Printing Duplex

3-9

Advanced Printing Features

Manual Feed via the Multipurpose Tray

For duplex printing from the multipurpose tray without a duplexer, fol-

low this procedure:

1

Access the Configuration menu and set the printer to Opera-

tor Control/Input Bin/Multipurpose.

2

Print on one side of the media.

3

Insert the media in the multipurpose tray with the side you 

want to print next facing up, and the leading edge going into 

the printer first.

s

Caution: Straighten the leading-edge of the media if it’s curled 

because curling can cause print media jams and wrinkles. Also, 

make sure that the media guides are set to the width of the 

media. Printing problems may occur if the media guides are set 

too loose or too tight.

High-Resolution and Duplex Printing

If your printer has a duplexing option, you may print on any of the 

media sizes at 600x600 dpi. However, printing duplex via the cas-

settes at 1200x1200 dpi resolution may require additional memory. 

(See the “Minimum System Memory Requirements” table on page 3-6 

for each resolution/media size memory requirement).