QMS 2060 Operation - page 27

Loading the 

Multipurpose 

Tray

2-15

Consumables

»

Note: 

When printing different-sized media, set the media tray to 

the largest media size. If the media tray is set to a smaller media 

size, large-size paper will curl, block the opening (when delivered 

to the output tray), and cause a media jam.

Envelopes: Special Considerations

The QMS 2060 Print System supports envelope printing from the 

multipurpose tray (up to 10 envelopes at a time):

n

Use landscape orientation to create the envelope text in your 

application.

—When formatting data for envelopes, leave a 0.16" (4.06 mm) 

margin from the edges of the envelope. 

n

Before printing envelopes

—Disable the duplexer if it’s installed. 

—Remember that you can print only on the address side of the 

envelope. 

—Make sure that the media guides are set to the height of the 

envelope. (Media jams or misfeeds may occur if they are too 

loose or too tight.)

n

Keep the following conditions in mind when choosing an enve-

lope:

—It must not contain any fasteners, clasps, windows, or peel-off 

strips otherwise the printer may be seriously damaged.

—Its edges must be square and it must not be wrinkled, torn, or 

curled.