QMS 2060 Operation - page 62
Cleaning the
Printer
QMS 2060 Print System
Operation
4-4
n
Keep the following in mind when storing the printer for an
extended period:
—Unplug the printer.
—Remove the toner cartridge from inside the printer. After
removing the cartridge from the printer, return it to the
protective bag in which it was originally packaged or wrap it in
a thick cloth to protect it from direct sunlight or any other bright
light.
—See the “Environmental Requirements” section of appendix B,
“Technical Specifications,” in the
Reference
guide, for storage
specifications.
Cleaning the Printer
Fine particles of dust from the paper may accumulate inside the printer.
Because this could affect the printer’s performance, the printer should
be cleaned on a regular basis to prevent potential malfunctions.
Cleaning Guidelines
M
WARNING!
Turn off the printer, unplug the power cord, and
disconnect any interface cables before cleaning.
ACHTUNG!
Ziehen Sie den Netzstecker aus der Steckdose bevor
Sie den Drucker reinigen.
In addition to unplugging the printer, follow these guidelines when
cleaning the printer:
n
Clean the printer before use or allow a few minutes after unplug-
ging it so that the fusing unit can cool down.