Riso HC5000T User Manual - Preparing to Print
1-6
Preparing to Print
After connection of the printer to a computer or network is complete, prepare paper and the Paper Receiving Tray for printing.
Usable Paper
This section describes usable paper and unusable paper.
Use of paper that is not adequate for the printer may cause paper jams, stains or a failure.
Use paper that conforms to the following specifications.
!
The print quality differs depending on the paper type.
Use recommended paper adequate for HC5000. For details, contact your dealer.
Basic Specifications of Paper
Paper that conforms to the following restrictions can be used for printing.
!
!
!
! Paper weight
!
!
!
! Paper Sizes That Can Be Used in the Standard Feed Tray
Registering Paper Size and Paper Type
If non-standard size paper or paper larger than A3/Ledger is used in the Standard Feed Tray, the paper size and the paper type must be registered
in advance.
"5.1 Paper Size Entry"#p.2-32
"5.2 Paper Type Entry"#p.2-33
When using paper larger than the A3/Ledger size, set "4.8.2 Stack Guide" of "4.8 Paper Ejection" of the menu setting to "OFF" and fold the
stack guides before printing. "4.8.2 Stack Guide"#p.2-25
For Standard Paper Feed Tray
46g/m
2
- 157g/m
2
(12-lb bond to 42-lb bond)
For Paper Feed Trays
52g/m
2
- 104g/m
2
(14-lb bond to 28-lb bond)
fm.book 6 ページ ２００５年７月２８日 木曜日 午後４時３４分