Riso HC5000T User Manual - page 25
1-10
Loading Paper
The method of loading paper in the Paper Feed Trays and the Standard Paper Feed Tray is described below.
"
"
"
" Number of Sheets That Can Be Loaded
The number of sheets* that can be loaded in the Feed Trays and the Paper Feed Tray are shown below.
The number of sheets that can be loaded varies with the thickness of paper.
*When 85g/m
2
(22.6-lb bond) is used:
"
"
"
" Paper to Be Loaded in the Standard Paper Feed Tray
When using paper shown below for printing, load the paper in the Standard Paper Feed Tray with the print face up.
• Special paper such as thick paper
• Paper for which printing has been performed onto the back side
• Paper larger than A3/Ledger size
• Paper smaller than B5 size such as postcard
"
"
"
" Load the paper.
After loading paper in the Standard Paper Feed Tray / Paper Feed Tray 1/ Paper Feed Tray 2, you must register the charac-
teristics of the paper. For registration, use "4.1 Standard Feed Tray"/ "4.2 Feed Tray 1"/ "4.3 Feed Tray 2" of the menu set-
ting according to the location of paper setting.
The details of setting are shown below.
• Paper size
• Paper type
• Double feed check
When loading paper for which printing has been performed onto the back side or paper with a dark ground colour, select
"OFF."
If these items are not set properly, when printing directed, the printer may judge that no paper is loaded and may not print
beautifully. Be sure to register these items.
"Menu 4 Configuration"#p.2-17
Paper Feed Tray 1
1,000 sheets
Paper Feed Tray 2
500 sheets
StandardPaper Feed Tray
1,000 sheets
fm.book 10 ページ 2005年7月28日 木曜日 午後4時34分