Riso HC5000T User Manual - page 62
2-27
2
4.9 Temp Data Clear
If "5.8.6 Temp Data Retention" of the menu setting is set to "ON," the printer retains the data of the last page (last sheet for duplex
printing) of the latest printing as temporary data. If you do not want to leave the temporary data in the printer because of confi-
dential documents or anything to that matter, use this function to clear it.
• If "5.8.6 Temp Data Retention" of the menu setting is set to "OFF," message "No Temp Data" is displayed.
• To clear the temporary data when printing stops temporarily, use "Menu 7 Job Clear" to clear the current job and then clear the tem-
porary data.
"Menu 7 Job Clear"#p.2-50
1
Press the MENU Key.
2
Press the
or
key to display
"Configuration."
3
Press the OK Key.
4
Press the
or
key to display
"Temp Data Clear."
5
Press the OK Key.
6
Check the message. To clear the data,
press the OK Key.
Message "Executing ..." is displayed and the data is
cleared. If the CANCEL Key is pressed, the screen in
step 4 reappears.
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT/ PAUSE Key.
fm.book 27 ページ 2005年7月28日 木曜日 午後4時34分