Riso HC5000T User Manual - page 63
2-28
4.10 Image Area (Maximum Print Area)
With this machine, a certain area of space is left along the edges of paper regardless of the original size. Normally, use the setting
"Standard." If the image is larger than the printable area, the relevant part of the image is not printed. (Reduction is not per-
formed.)
"
"
"
" Settings
• If the image is larger than the guaranteed print area (#p.viii), deterioration of print quality such as blur of characters and pictures may
occur depending on the original image.
• Depending on the application in which the original (data) is created, the margin is not made as specified with the print area setting.
(Some applications set the margin of printing regardless of the printer.)
• Even if the paper size is larger than 316mm × 460mm (12
7
/
16
" × 18
1
/
8
"), the actual maximum printable area is 314mm × 458mm
(12
3
/
8
" × 18
5
/
16
".)
• If "Maximum" is selected, the interior of the machine and the paper may be stained with ink.
1
Press the MENU Key.
2
Press the
or
key to display
"Configuration."
3
Press the OK Key.
4
Press the
or
key to display
"Image Area"
5
Press the OK Key.
The submenu of "Image Area" is displayed.
6
Press the
or
key to select.
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT/ PAUSE Key.
Standard
Printing can be performed into the area 3mm (
1
/
8
") inside from the sides of paper.
Print Area : 310mm × 454mm (12
3
/
16
" × 17
7
/
8
")
Maximum
Printing can be performed into the area 1mm (0.04") inside from the sides of paper.
Maximum Print Area : 314mm × 458mm (12
3
/
8
" × 18
5
/
16
")
fm.book 28 ページ 2005年7月28日 木曜日 午後4時34分