Riso HC5000T User Manual - Before Starting To Use
vi
Before Starting to Use
This section explains precautions you have to observe when using the machine.
Location for Installation
!
!
!
! The location for installation is determined based on consultation with the customer at the time of delivery.
!
!
!
! Contact your service representative before moving the machine.
!
!
!
! Avoid installing the machine in the locations listed below. Failure to observe this precaution may lead to machine failure or
human injury.
• Locations that are subject to sudden temperature change.
• Extremely hot and humid locations or cold and dry locations
• Heated locations or locations to exposed to direct cold air, direct hot air, or direct radiant heat
• Badly ventilated locations
• Dusty locations
• Locations that are subject to frequent vibration
Operation Environment
!
!
!
! Install the machine in a location of which the levelness meets the following conditions.
Front to rear: 3 mm (
1
/
8
") or less
Side to side: 3 mm (
1
/
8
") or less
!
!
!
! Appropriate environment conditions are shown below.
Temperature range: 15°C - 30°C (59°F to 86°F)
Humidity range: 40% - 70%(noncondensing)
Overall Dimensions
Space for extending the Standard Feed, Paper Receiving and space for pulling out Feed Trays are required.
The dimensions are expressed in mm.
!
!
!
! Front view
!
!
!
! Side view
fm.book vi ページ 2005年7月28日 木曜日 午後4時34分