Riso HC5000T User Manual - page 41
2-6
4.4 Feed Tray Relay
Sets whether or not to feed paper continuously
by changing automatically the feed trays.
ON
OFF
4.5 Triple-Tray Source
Sets whether or not the Standard Feed Tray is
selected in automatic tray selection.
ON
OFF
4.6 Job Separation
Selects whether or not to perform Job Separa-
tion in printing and selects the type of this func-
tion.
OFF
Between Jobs
Every Division
(If this function is set with the printer driver, the value is
displayed.)
4.7 Print Density
Adjusts the density of overall prints.
Density-Level 1/2/3/4/5
(If the density is set with the printer driver, the value is
displayed.)
4.8 Paper Ejection
Sets the Paper Receiving Tray.
4.8.1 Eject Wing
Sets the shape of the Eject Wing Adjust.
Auto
Special
4.8.2 Stack Guide
Adjusts the Stack Guide position.
Auto
Adjusted Position
OFF
4.8.3 Stack Guide Adjust
Sets the Adjusted Position in 4.8.2.
Side Guides: -20mm to +20 mm (-
13
/
16
" to +
13
/
16
")
End Guide: -20mm to +20 mm (-
13
/
16
" to +
13
/
16
")
4.8.4 Shifting Guide
Sets the Stack Guides move position
when the Stack Guide OpenButton is
pressed.
End Guide
Side Guides
End & Side Guides
4.9 Temp Data Clear
Clears temporary data.
-
4.10 Image Area
Sets the maximum print area.
Standard
Maximum
4.11 Cover Sheet Tray
Sets the paper to be loaded in the Cover Sheet
Tray of the optional HC Finisher.
4.11.1 Paper Size
Auto
A3/A4/B4/B5/A4-R/B5-R/Ledger/Legal/Letter/Let-
ter-R
4.11.2 Paper Type
Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
Menu 5 Administration
Sets the basic information of the printer.
5.1 Paper Size Entry
Registers non-standard paper sizes.
Up to five sizes can be registered.
(5.1.1 - 5.1.5)
000 × 000mm
90mm - 340mm × 148mm - 550mm (3
9
/
16
" - 13
3
/
8
" ×
5
13
/
16
" - 21
5
/
8
")
Item
Details of setting (range)
Refer-
ence
fm.book 6 ページ 2005年7月28日 木曜日 午後4時34分