Riso HC5000T User Manual - page 57
2-22
4.6 Job Separation
The setting of Job separation (set with the printer driver) can be changed while printing of the current job is performed.
"
"
"
" Settings
• When inserting separation paper, specify the feed tray separately.
"5.3 Separation Paper"#p.2-36
• If "5.3 Separation Paper" is set to "Off," printing stops for a few seconds in place of insertion of separation paper.
• Although Job Separation can also be set on the "Options" tab of the printer driver, you can temporarily stop printing with the
PRINT/ PAUSE Key and change or reset this function on the printer.
• If an optional HC Finisher is connected, "Z fold" , "Punching" and "Add Cover" of the Finisher can also be set with this function.
1
Press the MENU Key.
2
Press the
or
key to display
"Configuration."
3
Press the OK Key.
4
Press the
or
key to display
"Job Separation."
5
Press the OK Key.
The submenu of Job Separation is displayed.
6
Press the
or
key to select.
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT/PAUSE key.
OFF
Job Separation is not performed.
Between Jobs
Separation paper is inserted between jobs.
Every Division
Separation paper is inserted every division.
When collated printing is directed by the printer driver, separation paper is inserted between sets.
When non collated printing is directed, separation paper is inserted between pages.
fm.book 22 ページ 2005年7月28日 木曜日 午後4時34分