Riso HC5000T User Manual - page 58
2-23
2
4.7 Print Density
You can manually change the print density.
The density of overall printing is set. To adjust specific colours or to change the halftone reproduction method, use the "Image
processing" tab of the printer driver to adjust or process the image using the application software.
"
"
"
" Settings
Although Print Density can also be set on the "Options" tab of the printer driver, you can temporarily stop printing with the PRINT/
PAUSE Key and change or reset this function on the printer.
1
Press the MENU Key.
2
Press the
or
key to display
"Configuration."
3
Press the OK Key.
4
Press the
or
key to display
"Print Density."
5
Press the OK Key.
The submenu of Print Density is displayed.
6
Press the
or
key to select the
desired density.
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT/PAUSE key.
Density-Level 5
Dark
Density-Level 4
Medium dark
Density-Level 3
Standard
Density-Level 2
Medium light
Density-Level 1
Light
fm.book 23 ページ 2005年7月28日 木曜日 午後4時34分