Riso HC5000T User Manual - page 88
3-3
3
FORCEJET
™
Link Symbol
HC5000 Series realizes high speed printing by performing the optimum data processing and colour management with the printer
controller and adjusting print speed, paper size, paper quality, and ink quantity totally with the FORCEJET
™
engine. The
FORCEJET
™
Link Symbol indicates whether each printing related section functions properly.
If colour management cannot be performed properly because, for example, an ink cartridge is not set, the FORCEJET
™
Link
Symbol goes out. At this time, check the status of consumables and settings.
Error Message and Error Number
"
"
"
" Error Number
Under a message in the display, an error number that consists of alphanumeric characters is displayed. The first letter of the
error number indicates the error type.
The number of digits in relation to error number depends on the error location.
Y00-000
Ink Replacement Error
Example of Error
Number
Description
S00-000
System Error
Displayed when inspection or repair by service personnel is
required.
Contact your local dealer (or service representative).
X00-000 H00
Paper Jam
Displayed when a paper jam occurs
X00-000 F00
Paper Jam
Displayed when a paper jam occurs in the optional Finisher.
For details, refer to the "HC Finisher Maintenance Guide."
Y00-000
Ink Replacement Error
Displayed when ink runs out
Z00-000
Check Settings Error
Displayed when a cover or anything related is not securely closed.
W00-000
Warning
Various warning messages are displayed.
M00-000
Maintenance Call
Displayed when maintenance of this unit is required. Contact your
local dealer (or service representative).
Lighting location
Message
Solution
The supply in the ink cartridge runs out. Set a
new ink cartridge.
fm.book 3 ページ 2005年7月28日 木曜日 午後4時34分