Riso HC5000T User Manual - Menu 3 Temp Data Retrieve
2-16
Menu 3 Temp Data Retrieve
The data currently retained in the printer can be retrieved and printed again by specifying the number of copies (additional printing).
!
The Temporary Data Retrieve function can be used if "5.8.6 Temp Data Retention" of the menu setting is set to
"ON." For details, refer to "5.8 Initial Setting"
#p.2-44 of the menu setting.
• The retained data is the last page of the latest printing. In the case of duplex printing, the data of the last sheet (two pages) is retained.
• The maximum number of copies that can be set for additional printing is "9999."
• If "4.9 Temp Data Clear" of the menu setting has been performed or if setting of no retention data has been selected (5.8.6 Temp Data
Retention), message "No Temp Data" is displayed.
1
Press the MENU Key.
2
Press the
or
key to display
"Temp Data Retrieve."
3
Press the OK Key.
4
Press the
keys to move the cursor,
and press the
keys to input the
number of copies for printing.
5
Press the OK Key.
6
Press the PRINT/
//
/ PAUSE Key.
Printing of the set number of copies starts.
fm.book 16 ページ 2005年7月28日 木曜日 午後4時34分