Riso HC5000T User Manual - Menu 5 Administration
2-31
2
Menu 5 Administration
Sets basic information of the printer such as paper type entry, maintenance, and initial setting.
The items set here are effective until the setting is changed regardless of when the power is on or off.
"
"
"
" Functions
The functions that can be set are shown below.
!
!
!
! 5.1 Paper Size Entry#p.2-32
Five paper sizes such as non-standard sizes can be registered.
!
!
!
! 5.2 Paper Type Entry #p.2-33
Five paper types including printer recommended paper, standard paper, and any other types of paper can be registered.
!
!
!
! 5.3 Separation Paper #p.2-36
Set the feed tray to be exclusively used for separation paper.
!
!
!
! 5.4 Count Management #p.2-37
The number of printed sheets that can be checked.
!
!
!
! 5.5 Head Maintenance #p.2-40 "Ink Cartridge Replacement" #p.3-15
Perform maintenance of the ink head in the following cases:
• Part of print image is blurred.
• A certain colour is too light.
• The printer has not been used for a long time.
!
!
!
! 5.6 Configuration Information Print #p.2-42
Print the settings in a list.
!
!
!
! 5.7 Network Configuration #p.2-43
Set the DHCP, IP address, subnet mask, and default gateway if the printer is used through network.
!
!
!
! 5.8 Initial Setting #p.2-44
Set basic conditions such as details of sleep, beep sound, language, and metric/inch switch.
How to Enter the Administration Menu
1
Press the MENU Key.
2
Press the
or
key to display
"Administration."
3
Press the OK Key.
A confirmation screen is displayed.
4
Check the message and press the OK
Key.
"5.1 Paper Size Entry" is displayed.
If the CANCEL key is pressed, the screen in step 2
will reappear.
fm.book 31 ページ ２００５年７月２８日 木曜日 午後４時３４分