Riso HC5000T User Manual - page 29
1-14
When Adding or Replacing Paper in the Standard Feed Tray
When adding paper of the same size or replacing it with paper of a different size, use the Feed Tray Descent button. If all sheets
of paper is removed from the Standard Feed Tray, the tray lowers automatically.
1
Press the Feed Tray Descent Button
to lower the Standard Feed Tray.
Press and hold down the button until the tray lowers to
the desired position.
2
Add or replace the paper.
If feed tray relay is set:
In this unit, paper feed can be performed sequentially from Feed Tray 1, Feed Tray 2, and the Standard Feed Tray for high-volume print-
ing if the same size of paper is loaded in these feed trays.
If feed tray relay is set, load paper of the same size, same paper quality, and same paper type in these feed trays.
"4.5 Triple-Tray Source"#p.2-21 "4.4 Feed Tray Relay"#p.2-20
When you replace paper with different one, change "4.1 Standard Feed Tray" of the menu setting.
How to Close the Standard Feed Tray
With the power on, remove the paper from the Standard Feed Tray, spread the Feed Tray
Paper Guides, and close the Standard Feed Tray.
!
After checking that the Standard Feed Tray is at the lowermost position,
close it.
If you turn off the printer power before removing paper, the Standard Feed
Tray does not lower.
fm.book 14 ページ ２００５年７月２８日 木曜日 午後４時３４分