Riso HC5000T User Manual - page 79
2-44
11
After checking the message, press
the OK Key.
Message "Registered. Restart Printer" is displayed.
12
Press the power Key to turn off the
power and then on again.
After message "Shutting Down" disappears and the
Power Key becomes orange, press the Power Key
again to turn ON the power.
5.8 Initial Setting
Basic setting such as details of sleep, buzzer sound, language, metric/inch switch, and print head nozzle initialization is made
here.
AAA indicates factory default setting.
"
"
"
" Settings
5.8.9 - 5.8.49 are not displayed.
5.8.1
Sleep
Set whether or not to use the sleep mode for suppressing power consumption when the
printer is not used for a certain time.
ON: Sleep is enabled.
OFF: Sleep is disabled.
5.8.2
Waiting Time
Set the time that elapses until the printer enters the sleep mode if the sleep function is
enabled.
The time can be set to 1 - 99 minutes.
05
5.8.3
Beep Sound - Key
Set whether or not to sound the beeper when a key on the Operation Panel is pressed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.4
Beep Sound - Status
Set whether or not to sound the beeper when, for example, printing is completed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.5
Beep Sound - Error
Set whether or not to sound the beeper when an error such as paper jam occurs.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.6
Temp Data Retention
Set whether or not to retain the data of the last page in the memory until the next job when
printing is complete.
ON: Data is retained.
OFF: Data is not retained.
5.8.7
Displayed Language
Set the language displayed on the Operation Panel.
Japanese/UK English/US English/French/German/Italian/Spanish
5.8.8
Metric/Inch Switch
Select the Metric or Inch unit for display on the Operation Panel.
mm: Displayed in mm.
inch: Displayed in inch.
5.8.50
Head Recovery
Performs powerful cleaning of the print head nozzles to restore them to the initial state after
the printer is not used for a long time.
fm.book 44 ページ 2005年7月28日 木曜日 午後4時34分