Riso HC5000T User Manual - page 38
2-3
2
When an Error Occurs
When an error occurs, an error number and its description are displayed in the Message Display. For error numbers, refer to
"Chapter 3 Troubleshooting"#p.3-1.
"
"
"
" Status
The status of the printer is displayed. The following messages are displayed.
"
"
"
" Print Quantity Display
The number of printed copies and the preset number of copies for printing are displayed.
For collated printing, the preset number of sets and the number of printed sets are displayed. For non collated printing, the pre-
set number of sheets and the number of printed sheets are displayed.
"
"
"
" Duplex Display
This display appears when duplex printing is set.
"
"
"
" Paper Size Display
The selected tray and the size and the orientation of the papers are displayed.
If a feed tray is specified individually, the specified tray is displayed.
If automatic selection of a feed tray is set, "Auto" is displayed, and during printing, the paper size is displayed.
Message
Meaning
Please Wait a Moment
The printer is warming up or is being restored from an error.
Printing cannot be performed.
Warming Up
The printer is warming up because the temperature of the print head is low.
Ready
The printer is ready to receive data.
Receiving Data
(The Data Indicator blinks.)
The printer is receiving data for printing from a computer.
Printing Mode Off
The printer is waiting for a print instruction from the Operation Panel.
Printing
The printer is printing or processing data.
Cooling Down
The printer is cooling down because the temperature of the print head is high.
Shutting Down
After you press the Power Key on the Operation Panel to turn off the power,
the printer shuts down.
fm.book 3 ページ 2005年7月28日 木曜日 午後4時34分