Riso HC5000T User Manual - page 48
2-13
2
Menu 1 Print Position Adjust
Adjusts the print position.
Also the positions can be adjusted for punching and stapling after printing.
"
"
"
" Adjustable Range
If you want to shift the print position after checking the printed sheet, use the Cursor Keys on the printer to shift the position.
• With reference to the current print position, you can shift the position between 0mm and 20 mm (0" and
13
/
16
") in the vertical
(up and down) and horizontal (to the right and the left) directions.
• You can adjust the position in 0.5 mm (0.02") increments.
• If "4.9 Temp Data Clear" of the menu setting has been executed or if setting of no temporary data has been selected (5.8.6 Temporary
Data Retention), message "No Temp Data" is displayed.
• In duplex printing, the print position moves to the same adjusted position on both the front and back sides. This function is useful for
making margins for binding.
• The setting is effective in additional printing performed with "Menu 3 Temp Data Retrieve."
fm.book 13 ページ 2005年7月28日 木曜日 午後4時34分