Riso HC5000T User Manual - page 53

2-18

4.1  Standard Feed Tray/

//

/ 4.2  Feed Tray 1//// 4.3  Feed Tray 2

Set the size and type of paper to be loaded in the Standard Paper Feed Tray and the other Paper Feed Trays and turn on or off the 

Double Feed Check function.

Be sure to set when you have changed the type or size of paper.

"

"

"

" Settings

*1 Sizes that have been registered in "5.1  Paper Size Entry" are displayed.

*2 Types that have been registered in "5.2  Paper Type Entry" are displayed.

An example of method of setting the Standard Feed Tray is used for explanation in the procedure below. For Feed Tray 1 or Feed 

Tray 2, display "Feed Tray 1" or "Feed Tray 2" in step 4.

1 

Press the MENU Key.

2 

Press the 

 or 

 key to display 

"Configuration."

3 

Press the OK Key.

4 

Press the 

 or 

 key to display 

"Standard Feed Tray."

5 

Press the OK Key.

The submenu for the Standard Feed Tray (Feed tray) 

is displayed.

4.1.1/4.2.1/4.3.1  

Paper Size

Can be selected from Auto, A3, B4, A4, B5, A4-R, B5-R, Foolscap  (Ledger, Legal, Letter, Letter-R, 

Statement)

Registered Paper Size 000 × 000 mm  (*1).

4.1.2/4.2.2/4.3.2  

Paper Type

Can be selected from Standard Paper 1, High-Quality 1, High-Quality 2

Registered Paper Type 1 - 5  (*2).

4.1.3/4.2.3/4.3.3  

Double Feed Check

Selects whether or not to detect "double feed" (feeding of multiple sheets of paper at a time).

When loading paper for which printing has been performed onto the back side or paper with a dark 

ground colour, turn off "Double Feed Check."

OFF: Double Feed Check is disabled.

ON: Double Feed Check is enabled.

fm.book  18 ページ  ２００５年７月２８日　木曜日　午後４時３４分